1 / 2
$1750.00
≥1 Ton
$1700.00
≥50 Ton
Model No. : | JIS G3445 |
---|---|
Brand Name : | UNTUK KAYA |
standard : | Gb,Astm,Jis,Din,Api |
Ningbo, Zhejiang, China
Deskripsi Produk
Sistem Knalpot Otomatis STKM11A Tabung baja yang dilas
1.Details:
application |
Automobile and motorcycle Shock Absorber Pipe Hydraulic-cylinder Pipe Mechanical steel pipes for auto and motor parts Gas Spring pipe motor casing pipe |
size |
length--2~12m WT--2~5mm OD--10-20mm |
material | STKM11A |
Production process | ordinary high-frequency welded pipe |
Advantages | small diameter and thick wall |
Surface Quality | The internal and external surfaces of the steel tube are not allowed to have cracks, scabs, folds, delaminations, laps, and burns. Allows for scribes, scratches, misalignment of welds, burns, oxide scales, and external burr removal traces that are not more than a negative wall thickness deviation |
Inspection items |
chemical composition Tensile test Ultrasonic examination Eddy current flaw detection Bending test Flattening test |
2.Poleransi yang dapat dikerjakan dengan diameter luar dan ketebalan dinding (mm)
Type of steel Tube | Dimension of steel tube | Permissible tolerance | ||
Average class | High class | |||
Hot-rolled (extruded and expanded) tube |
Outer diameter D | All |
±1% (min.+/-0.50) |
- |
Wall thickness | All |
+15%/-12.5% (min.+4.5/-4.0) |
- | |
Cold-drawn (cold-rolled) tube | Outer diameter D | 6~10 | ±0.2 | ±0.15 |
>10~30 | ±0.40 | ±0.20 | ||
>30~50 | ±0.45 | ±0.30 | ||
>50 | ±1% | ±0.8% | ||
Wall thickness | <1 | ±0.15 | ±0.12 | |
>1~3 |
+15% -10% |
+12.5% -10% |
||
>3 |
+12.5% -10% |
±10% | ||
Note: For hot-expanded tubes with outer diameter>35mm,the permissible tolerance of wall thickness is±18%. |
3. Sifat mekanik longitudinal dari tabung baja
NO. | Steel Grade | Tensile Strength(Mpa) | Yield point(Mpa) | Elongation after breaking(%) | |
s<16 | s>16 | ||||
Not less than | |||||
1 | 10 | 335~475 | 205 | 195 | 24 |
2 | 20 | 410~550 | 245 | 235 | 20 |
3 | Q295 | 430~610 | 295 | 285 | 22 |
4 | Q345 | 490~665 | 325 | 315 | 21 |
4. Penyimpangan yang dapat dikeluarkan dari analisis produk dari batas yang ditentukan:
Element | Limiting values for cast analysis | Permissible deviatioon of the product analysis in % by mass |
C | ≤0.22 | +0.02 |
Si | ≤0.55 | +0.05 |
Mn | ≤1.60 | +0.10 |
P | ≤0.025 | +0.005 |
S | ≤0.015 | +0.003 |
Al | ≥0.025 | -0.005 |
5. Menunjukkan:
Ningbo, Zhejiang, China
Kirim pertanyaan Anda ke pemasok ini