1 / 4
Model No. : | IG7 |
---|---|
Brand Name : | Brando |
Ningbo, Zhejiang, China
Deskripsi Produk
4Cyl IG7 Dakota Navajo Injector Rail LPG CNG
Fitur 2 Ohm 4 Cylinder IG7 Dakota RAIL Type Rail Injector sebagai berikut:
1. Rail injector untuk gas LPG dan Gas Bumi.
2. Versi tunggal dengan stroke 0,47 mm.
3. Gulungan dengan konektor kedap air built-in 2 arah, kompatibel dengan Amp.
4. Tubuh dalam aluminium.
5. Membangun teknologi yang cocok untuk mencapai kinerja tinggi dalam hal kecepatan dan durasi.
6. Tidak terlalu sensitif terhadap akumulasi kotoran.
7. Stabilitas dan pengulangan aliran internal yang tinggi .
Dimensi keseluruhan dari 2 Ohm 4 Cylinder IG7 Dakota Navajo Rail Injector:
Parameter teknis RAIL Type IG7 DAKOTA Lpg / Cng Injector Rail:
Characteristic | Unit | Value | Note |
Injector Version | N° of cylinders | 2, 3, 4 |
|
Material body and treatment |
|
Aluminum | |
Relative Pressure | Bar (Psi) | From 0.5 to 2.0 (7 to 29) | Working pressure |
4.5 (65) | Max pressure | ||
Rated voltage (at coil) | Volt | 10.8 - 14.4 |
|
Coil type | by encoding | E2 |
|
Resistance | Q | 2 | ± 5% at T= 25° |
Suggested peak current time (duration) | ms | 2.4 |
|
Suggested holding current (±10%) | A | 1.4 |
|
Cold Starting Requirements |
|
Increase up to 20% the "peak current time" for first cycles when gas temperature is < 10°C | |
Complete OPENING Response Time | ms | 1.7 | (±10% - total injection time 5 ms) ± 5% tested without nozzle at 14V Dp=1bar T= 25°C |
Complete CLOSING Response Time | ms | 1.4 |
|
Minimum injection pulse | ms | 1.8 | tested with 2 mm nozzle diameter at 14V Ap=1 bar T= 25°C |
Stroke | Micron | 470 |
|
Seat Diameter | mm | 3.3 |
|
Static flow rate (with max nozzle O) for 1 single injector at 20°C (with air) | SLPM (sL/min) | 115 | at 1 bar inlet pressure |
170 | at 2 bar inlet pressure | ||
Leakage (tested with air) | cc/h | < 15 |
|
Noise level | dB | T.B.D | ±1 dB Rail Test Condition |
Compatibility with gas |
|
LPG, CNG |
|
Driver Stage |
|
Peak and Hold (PWM) |
|
Coil Connector type |
|
2 way Amp super seal fermale connector with tab contacts | About connecting wire, refer to our drawing, code 114.01.AMP.001 |
Inlet gas fitting for rubber hose | mm | φ10 mm, φ12 mm, φ14 mm, φ16 mm | |
Outlet gas fitting |
|
Calibrated nozzles M8x1 for rubber hose φ4 mm - φ5 mm - φ6 mm | |
Calibrated hole φ range (for nozzles) | φ | From 1.00 to 3.25 mm (0.25 mm step) |
|
Approvals |
|
110R-00 67R-01 (-40°C to +120°C) |
|
Principle of operation |
|
Solenoid valve, Normally closed, Mobile Plunger | |
Power handling capability LPG | HP/cyl | 1 bar up to 40 HP/cyl | |
Power handling capability CNG | HP/cyl | 2 bar up to 35 HP/cyl | |
Coil IP Rating |
|
IP54 |
|
Packing acara dari Tipe Rail 2 Ohm 4 Cylinder IG7 Dakota Rail Injector:
Instruksi untuk penggunaan:
1. Disarankan untuk memasang filter di ujung depan pipa injeksi dari rel semprotan untuk secara efektif melewati kotoran dalam kebocoran udara.
Cegah kotoran dan partikel halus memasuki rel kereta api dan ganti filter selama tiga bulan atau 20.000 kilometer.
2. Untuk memastikan penggunaan terbaik, disarankan untuk menginstal rel sejauh mungkin pada sudut vertikal.
3. Menurut model rel semprot yang berbeda, perlu untuk memilih tipe rel semprot yang sesuai dalam pengaturan kontrol listrik.
4. Menurut kekuatan mesin, Anda harus memilih diameter nozzle yang sesuai.
Fokus pada tuntutan Anda, Tawarkan solusi terbaik kepada Anda:
√ Hubungi kami jika ada beberapa poin yang Anda ragukan
√ Hubungi kami jika suatu tempat perlu diubah
√ Hubungi kami jika bukan yang Anda cari
√ Hubungi kami jika Anda sedang mendesain
Selamat datang di pertanyaan dan pertanyaan Anda!
Ningbo, Zhejiang, China
Kirim pertanyaan Anda ke pemasok ini